MSN Low Voltage Withdrawable Switchgear

You can rest assured to buy DAYA MSN Low Voltage Withdrawable Switchgear from our factory and we will offer you the best after-sale service and timely delivery. Since its establishment, the company has always adhered to the business philosophy of quality first, customer first, high-quality service, and honest management, and has done every detail of the product with the spirit of craftsmanship to serve every customer well.

DAYA MSN Low Voltage Withdrawable switchear  Details

DAYA MSN Low Voltage Withdrawable switchear  Working conditions

Altitude: ≤ 2000 m.

Temperature range: -5 °C to +40 °C, and the average temperature within 24 hours should not exceed +35 °C.

The relative humidity should not exceed 50% at +40 °C, and higher relative humidity is allowed at low temperature (90% at +20 °C). And air must be clean.

Workplaces should be free of fire, explosion, serious pollution, chemical corrosion and severe vibration.

Gradient: ≤ 5°, vertical installation.

Temperature range of transportation & storage: -25 °C to +55°C, and the temperature can be up to +70 °C in short time (within 24 hours).

DAYA MSN Low Voltage Withdrawable switchear Parameter (Specification)

Fully certified to IEC 61439-1/-2 low-voltage switchgear assembly up to 690V, Main busbar up to 7300A,Icw up to 100kA; Distribution busbar up to 1500A, Icw up to 100kA

Passive arc protection criteria 1 to 7, tested acc. IEC TR 61641 Ed.3 criteria 1 to 7, arc proof certified up to 690V, 100kA

Modular construction, extendable at both ends and reconfiguration capabilities

Ease of operation with closed doors and single handle operation

Segregation up to form 4b

Flexible and bespoke: unified integration with the wider MNS portfolio, combined ACB and modules solutions and stacked 2 and 3 ACBs in one section can further save space in the switchgear room.

DAYA MSN Low Voltage Withdrawable switchear Service

Pre-sales

We provide technical support and complete power distribution solutions tailored to your needs. If the design drawings you provide are deemed unfeasible, we will optimize the plan and adjust it with the dimensions of the cabinet, the location of the equipment, and so on. We will also optimize the configuration of the products to make them meet your requirements.

After-Sales

If any problem occurs, we will first provide support by phone or email. We will perform a remote debug if necessary. Furthermore, our products come with a troubleshooting manual for reference when trying to find the fault and solve issues by yourself. Most problems can be solved by the above-mentioned methods. We will check in every year or so to acquire detailed information about your equipment to get a better understanding of the inner workings.

Our customer service promise

1. We will quickly solve the problem after receiving the issue report or repair request.

2. We then explain the cause of failure in detail and any fees will be charged according to market pricing.

3. If we take any parts back for inspecting, we will apply fragile notice stickers on them or write their serial number down to maintain the safety of the parts.

4. If your complaint is deemed valid, we will refund repair fees to you on-site.